HomeBlogBlogRemove Resin From a Glass Vase (Soft or Cured)

Remove Resin From a Glass Vase (Soft or Cured)

How to get resin out of a glass vase?

Getting resin out of a glass vase is usually easiest when you match the method to the resin’s state: soft/tacky, fully cured, or thick pooled drips. Glass is durable, but it can scratch, so start gentle and scale up only as needed.

1) If the resin is still tacky or soft

Put on nitrile gloves and wipe away as much as possible with paper towels. Then use isopropyl alcohol (70–99%) on a fresh cloth to dissolve the residue. Work in small sections and rotate to a clean part of the cloth often so you’re lifting resin instead of smearing it.

2) If the resin is fully cured (hard)

Chill the vase in the freezer for 30–60 minutes. Cold can make cured resin more brittle, helping it release from slick glass. Remove the vase and use a plastic scraper, an old gift card, or a plastic spoon to gently pry under an edge and lift. Avoid metal blades, which can scratch and chip glass.

3) For stubborn spots: controlled heat + lift

If freezing doesn’t work, try gentle heat to soften the resin. Use warm (not boiling) water or a hair dryer on low, keeping the airflow moving. Once the resin begins to give, lift it with a plastic scraper and follow with isopropyl alcohol to remove the last film.

4) Remove haze and finish clean

Wash the vase with warm water and dish soap, then dry with a lint-free towel. If you still see a dull patch, use a small amount of glass cleaner or a paste of baking soda and water, rubbing lightly, then rinse and dry again.

If you’re styling or caring for resin décor, see the related guide here: https://luxian.shop/blog/guide-vintage-resin-vase-style-guide/.

FAQ

Will acetone damage a glass vase?

Acetone typically won’t harm plain glass, but it can damage painted details, decals, or some decorative coatings. Test a hidden spot first and keep acetone away from any finished or colored areas.